Keyless Remote Programming Available for the following Acura TSX models.
Showing posts with label remote programming. Show all posts
Showing posts with label remote programming. Show all posts
02/02/2018
Acura TSX Remote Programming
Keyless Remote Programming Available for the following Acura TSX models.
Acura TL Remote Programming
Keyless Remote Programming Available for the following Acura TL models.
1997 - 2006 Acura TL
Programming Instructions
Note: Entering the
programming mode cancels all learned keyless remotes, so none of the previously
programmed remotes will work. You must reprogram all of the keyless remotes
once you are in the programming mode.
You must complete
each step within 4 seconds of the previous step to keep the system from
20/01/2018
2007 Acura RSX
Programming Instructions
NOTE: The codes of up to three transmitters can be read into the keyless receiver unit memory. If a fourth code is stored, the code which was input first will be erased.)
Acura RSX Remote Programming
Keyless Remote Programming Available for the following Acura RSX models.
2006 Acura RSX
Programming Instructions
NOTE: The codes of up to three transmitters can be read into the keyless receiver unit memory. If a fourth code is stored, the code which was input first will be erased.)
2005 Acura RSX
Programming Instructions
NOTE: The codes of up to three transmitters can be read into the keyless receiver unit memory. If a fourth code is stored, the code which was input first will be erased.)
2003 Acura RSX
Programming Instructions
NOTE: The codes of up to three transmitters can be read into the keyless receiver unit memory. If a fourth code is stored, the code which was input first will be erased.)
2002 Acura RSX
Programming Instructions
NOTE: The codes of up to three transmitters can be read into the keyless receiver unit memory. If a fourth code is stored, the code which was input first will be erased.)
Acura RL Remote Programming
Keyless Remote Programming Available for the following Acura
2004 Acura RL
Programming Instructions
AT TIME OF PROGRAMMING, ALL REMOTES (UP TO 3) TO BE PROGRAMED/REPROGRAMMED MUST BE PRESENT.
The following steps 1-12 are done on a single remote,
2003 Acura RL
Programming Instructions
AT TIME OF PROGRAMMING, ALL REMOTES (UP TO 3) TO BE PROGRAMMED/REPROGRAMMED MUST BE PRESENT.
The following steps 1-12 are done on a single remote,
2002 Acura RL
Programming Instructions
AT TIME OF PROGRAMMING, ALL REMOTES (UP TO 3) TO BE PROGRAMMED/REPROGRAMMED MUST BE PRESENT.
The following steps 1-12 are done on a single remote,
2009 Acura MDX Key Fob Programming
Programming Instructions
Warnings
Each step must be completed within 5 seconds.
All the doors and rear hatch/trunk must be closed during programming.
- Gather the remote for the vehicle on hand.
2008 Acura MDX Key Fob Programming
Warnings
Each step must be completed within 5 seconds.
All the doors and rear hatch/trunk must be closed during programming.
- Gather the remote for the vehicle on hand.
2007 Acura MDX Key Fob Programming
Warnings
Each step must be completed within 5 seconds.
All the doors and rear hatch/trunk must be closed during programming.
- Gather the remote for the vehicle on hand.
2004 Acura MDX Key Fob Programming
Programming Instructions
1. Start with your key in your right hand and any remote in your left hand. Keep all additional remotes easily accessible to your left hand. Insert the key into the ignition.
2. Perform these steps within 5 seconds.
- Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.)
- Press the UNLOCK button on the remote and release.
- Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
- Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.
- Press the UNLOCK button on the remote and release.
- Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
- Turn the ignition to the ON position (where the instrument panel lights are turned on without starting the engine.
- Press the UNLOCK button on the remote and release.
- Turn the ignition back to LOCK (the position where the key is inserted) and leave the key in the ignition.
3. Within 5 seconds turn the ignition to ON.
4. Press the UNLOCK button on the same remote and release. The power door locks will cycle to confirm the system is in programming mode.
5. Within 10 seconds press the UNLOCK button on the same remote again and release. The door locks will cycle to confirm that the system accepted this remote.
6. Repeat step 5 for second or third remotes.
7. Turn the key back to LOCK and remove from ignition to exit programming mode.
1997 Acura CL
Programming Instructions
- Turn the ignition switch on (II on the ignition)
- Within 1-4sec, push the transmitter lock or unlock button with the transmitter aimed at the keyless receiver unit. (Just at the steering wheel is fine)
- Within 1-4sec, turn the ignition switch off
- Within 1-4sec, turn the ignition switch on(II)
- Within 1-4, push the transmitter lock or unlock button w/ the transmitter aimed at the
- receiver again.
- Within 1-4sec, turn the ignition. switch off
- Within 4sec, turn the ignition switch On(II)
- Within 1-4sec, push the transmitter lock or unlock again.
- Within 4 sec, turn the ign off
- Within 4 sec, turn the ign ON
- Within 1-4, push the transmitter again
- Confirm you can hear the sound of the door actuators. W/in 1-4sec, push the trans lock or unlock button again.
- W/in 10sec, aim the transmitters (up to three) whose codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stored.
- Turn the ignition switch off, and pull out the key.
- Confirm proper operation with the new codes.
Subscribe to:
Posts (Atom)
Designed by OluwaThank_U.