How to use Sp Flashtool

Sp Flash Tool is an application software you could find very useful in fixing issue like phone not booting up,phone not booting to recovery mode and bricked MTK devices like(Tecno,Infinix,Gionee,Opsson, etc)


Requirement

• A Pc
• A Usb Cord
• Download and install MT65XX Vcom Drivers from here
• Download Sp Flash Tool latest version from here
• Download the stock rom you wish to flash from here and extract it to a folder 
• And Your Brain

Let's get started

• Extract Sp flashtool and launch as an Administrator
  

• Now click on scatter-loading by the right hand side
  

• A dialog box will pop up, now locate the extracted stock rom you download then you click on the scatter file(it is a text file and it has word scatter in it's name) then click on Open
  

• A list of marked item should appear in the Sp Flashtool interface
  

Untick Preloader cause it's not really necessary but a great precaution,you can only t tick this if the device is completely DEAD and make sure you untick DSP_BL if found on the list

Now click on Download at the top left hand side

Power Off your phone and remove the battery if not inbuilt battery but nowadays most device require battery for flashing

• Now connect your phone to the pc using the usb cord, sit back and wait for the Sp Flashtool to detect your device
• Once the phone is detected a red line will display at the bottom of the Sp Flashtool interface follow by a Yellow line and once Flashing Process is completed a Green Mark will display on the Screen
  
• Ensure you do a factory reset in recovery mode to clear any error
• GoodLuck

Kindly drop comment's if you encounter any error...